Dental LED Light Alya

  • LED dental operating light Alya

    The LED-Technology FARO masterpiece is now even better

    The state of the art of LED technology ultimate generation. Powerful and reliable, Alya dental light is equipped with the patented FARO triaxial movement and optical system, with the renewed removable and autoclavable handles and with a sophisticated electronic device for a better control of the lighting spot. Also, a new electronic board ensures the perfect compatibility with the video acquisition systems and the diagnostic tools, that nowadays are even more common in the dental practices.
    LED dental operating light Alya LED dental operating light Alya LED dental operating light Alya

    One lamp for all needs

    The new beautifully designed and ergonomic joints are made of solid aluminum alloy and then painted. They allow, with a simple twist, to mount Alya dental LED light both on the dental unit and on the ceiling. The new pin for insertion in the column of the dental unit is easily replaceable with pins of different diameter giving the possibility to install Alya on every brand of dental units.
    Patented optical project with reflected light

    Alya dental light, thanks to its exclusive optical project with reflected light, and through the 258 small reflecting facets included in each of the two parables, avoids the direct vision of the 2 LEDs, creating a 180 x 90 mm spotlight area absolutely uniform. The accurate definition of the spotlight removes the glare, protecting your patients’ eyes.
    The scialytic effect

    Optimal light on the operating field, reducing to minimum the shadow produced by the instrument interposed between the light and the field. The new FARO dental LED light produces the smallest net shadow of the market.

    The spotlight produced is comprised between 3.000 and 50.000 lux.
    Progressive adjustment of the illuminance

    The new electronic control of the illuminance, activated by joystick or sensor, adjusts the light from maximum to minimum power without any interruption, keeping the colour temperature constant.
    Chromatic performance (CRI)
    The standard states that the lamp light must have a CRI index higher than 85; the index of this new FARO lamp gives a typical value of 95, assuring a colour performance never achieved in LED operating lights. The new LED, besides a high chromatic performance given by the reduction of the blue colour component in favour of the red component, limit the potential photochemical risk.
    FARO handiness
    The perfect balancing, combined with the exclusive rotation system of the head on the optical axis, assures the best precision in the orientation of the light beam, reducing the risk of an accidental dazzling for the patient.
    Electronic controls

    • Switching control and dimming: micro-joystick on the head
    • Switching control and dimming version also from unit, or by foot control
    • Electronic lighting adjustment by microprocessor
    • Remote control from the unit: allows to repeat all joystick functions
    • Automatic memorization of used light intensity, also after switching off the unit’s power or after the ‘rinse’ function
    • Sound signal at minimum and maximum light intensity
    • Exclusive ‘one touch’ regulation (composite position) to reach the minimum intensity with a simple ‘click’
    • NEW PROXIMITY SENSOR with shielding devices for high-output radio frequencies

    Power Supply with transformer  230 Vac +/- 10% - 50/60 Hz

    Power Supply with power pack
    Power Supply without power pack​             

    90-264 Vac - 47-63Hz
    17-24 Vac - 50-60 Hz 22-35 Vdc

    Absorbed Power                                                  

    max 26 VA


    from 3.000 to 50.000 (at 700 mm of distance)

    Lighting Spot                                                                             

    190 x 90  mm (at 700 mm of distance)

    Cooling system                              

    static heat sink (no fan required)


    removable and autoclavable

    Medical Device complies with Directive 93/42/EEC and s.m.i. - Medical devices - class I - Applied Standards: EN 60601-1, EN 60601-1-2, EN 60825 , EN 62471; 24 months guarantee.
    *(The above specifications are typical values subject to tolerance)

    Thanks to a wide range of accessories ALYA is available for WALL, CEILING and FLOOR applications.
  • Cleaning the parabolas

    Clean using cotton wool and ethyl alcohol or Perflex.
    Do not use detergents containing surfactants or water-repellents that could leave marks.
    Slight marks do not compromise the quality of the light.
    Sterilizing the handles

    The handles can sterilized on a standard cycle 121°/134° for a maximum of two hundred (200) sterilizations.
    Other parts of the light

    Clean with a soft cloth.
    It is strictly forbidden to use abrasive substances, detergents with trichloroethylene, benzene, oil of turpentine or similar on any parts of Alya dental light.
  • Reproducing the natural light

    The human body is designed to live in nature, according to rhythms dictated by the sunlight.
    Due to the natural production of serotonin (during daylight hours) and melatonin (during hours of darkness), our biorhythm makes us more productive during the day and more inclined to sleep at night. Even the seasons affect our biorhythms: in summer the most amount of light makes us more active, while in winter the lack of light makes us more tired and in need of rest. Working life, however, compels us to take a different rhythm, regulated by the requirements of productivity; the result of this “forced” adaptation is a source of considerable stress to our body. The most effective way to minimize this kind of stress is to make sure that the light received by our eyes in the work environment is as similar as possible (in quantity and in quality) to sunlight.

    The overloading of the visual system is also harmful to the health of the eye. It manifests as various symptoms such as burning, tearing, dry eye, a feeling of foreign body, eye pain or discomfort, or even blurred vision or ghosting. These disorders, in the long run, can cause diseases procuring a real lack of concentration, headaches over orbital and temples, redness, burning, or discomfort in the eyes even already in the morning when you wake up. A continuous exposure to a wrong light source can lead one to a set of direct or reflected pathologies. On the contrary, a good quality and flexibility of the vision is a prerequisite for your general welfare.
    The collateral effects of a wrong lighting
    Modification of the biorhytm
    Exposure to a source of
    light which is ineffective 
    nduces a sense of fatigue
    even in the hours usually dedicated to work.

    Stress, tensions, headaches
    Too much light or too much direct light causes
    stress, nervous tensions
    and headaches

    Eye diseases
    The visual weariness, as well
    as generating a risk of serious
    eye diseases, can have an
    indirect effect on mood and perception of good health and emotional well-being.
    The continuous use of a
    wrong light source may
    prompt physicians to assume unnatural postures, causing
    pain and pathologies of the
    musculoskeletal system.

    And the patient?

    The operating light is the element that is constantly in front of the eyes of the patient. A wrong light is a source of stress for him, who can be “blinded” at every movement of the lamp. This stress is inevitably reflected on the perception which he has of the doctor’s cabinet he is in. More relaxed is a patient, more willing to receive treatment and, last but not least, to come back in the dental cabinet.
    Quality of light
    When choosing a dental lamp you must consider some features for the determination of its quality of light. It is essential that artificial light is able to faithfully reproduce the colours of the materials and tissues which may appear different, depending on the colour temperature of the light source and the relative colour rendering. This is of fundamental importance for the success of the job. The colour temperature is measured in Kelvin (K): a lower value corresponds to a warmer colour tone which tends toward red.
    A higher colour temperature means cooler shades (green and blue). The reference “neutral” value of the colour temperature, “the pure white”, corresponds to the midday sun on a beautiful day and is about 5,000 K.

    Even the sunlight affects colour perception: at changing of the seasons or hours of the day we see different colours. Therefore it is important to have a light source that, at any time, is able to give
    accurate informations to the doctor. All FARO lamps offer intensity adjustment so that the visual function can capture the tiny details of the operative field with minimal effort, constantly keeping the colour temperature at 5,000 K.
    How much light?
    The amount of light required to illuminate the operative field depends on several factors. Proper lighting must have characteristics of intensity, distribution and quality appropriate to the visual function of the physician, in order to capture the details of the operative field. Depending on the age of the physician, for example, it will require a higher or lower quantity of light. In addition, the smaller details will be observed, the greater the intensity of light is required. A good source of illumination must be adjustable, without losing its characteristics of colour temperature and illumination uniformity.
    Managing the contrast

    To avoid visual stress should be avoided excessive contrast between the working area and the surrounding environment; the continue need of adaptation to any movement of the eyes leads to an inevitable eye fatigue. It is therefore a good rule that the lighting of the workplace is higher than the one in the room, and, for a more comfortable visual activity, the light source should not be addressed directly to the eye: it must be disposed or behind or side or above the observer.
    The glare
    The glare, not only annoying, is potentially damaging because it can cause serious eye lesions on the retina. These lesions can be determined by a thermal effect (coagulation of proteins in the retina) or by a photochemical effect (chemical reactions, without raising the temperature). Especially children are exposed to this risk, as they are subject to the development of their natural defenses. The reflected light optical project FARO provides a defined spot and does not produce heat to minimize this phenomenon. In the case of patients with diagnosed eye diseases is also possible to obtain an overall screen through.
  • Brochure Dental LED Light Alya

    Brochure Lumiere LED Dentaire Alya Français
    Brochure Zahnmedizinische LED-Leuchte Alya German
    Brochure Làmpara de LED Dental Alya Español
    Brochure FARO Odontoiatric Lighting System English
    User Manual Dental LED Light Alya Multilingual

#502, Barton Centre 84, MG Road, Bangalore +91-80-25591234 info@farodentalindia .com

About Us

FARO S.p.A., founded in 1948 by Osvaldo Favonio, designs and produces equipment for the manufacturer of dental units, dental cabinets and dental laboratories. In over 5,000 square meters of the production plant in Ornago (MB), both the production and the design and research & development take place. 


Enter your email to join our mailing list

Sales Services

The effort we put into sales services is thought to build solid, cordial, human relations. Reliable relations, so durable as our products are. We are at your side to keep you updated about the news, we help you to choose the right product by answering to your questions and providing all the documentation; we assist you in managing the orders and we answer to your questions about the use and maintenance of the equipments.